Bi Metallic Steam Trap

Bi Metallic Steam Trap

Bi Metallic Steam Trap

UKL Introduces the Bi-Thermostatic Bimetallic steam traps, with corrosion resistant regulator. These Traps are unaffected by water hammer and superheated steam which having balanced pressure valve, independent seat and cone valve, and having a external adjustment device that can be used while the trap is functioning, for temperature and flow discharge. The trap also has an integral Y type Strainer.

The most innovative of the bimetallic steam traps is the bi-thermostatic steam trap of balanced pressure that incorporates two antagonistic [Opposing] thermostats.

The thermostat on top consists of various bimetallic plate pairs guided by the plugs stem, and the Lower thermostat is formed by one bimetallic sheet that leans and is guided in its edges by the body of the steam trap.

The superior [Upper] thermostat expands with the increase in temperature pressing the plug in the closing direction; at the same time, the inferior [lower] thermostat arches itself allowing the movement of the valve in the same direction, effectively resulting in the progressive strangulation of the condensate flow, till it reaches its complete closure.When the condensate temperature decreases the thermostats act inversely, consequently offering a large flow section.

Bi Metallic Steam Trap

The most Prominant advantages are:

Optimum energy efficiency
External adjustment mechanism while in service
Possibility of repair while in operation
Very long Life: Three times the life of the conventional Thermostatic Trap
High reliability and versatility, Robust construction
Resistance to water hammering, corrosive condensate, Freezing
Automatic de aeration
Works against high back-pressures
Works in Superheated steam and High differential pressures
Reduced maintenance and spare part cost

Below listed are the related files that can be downloaded to you PC. All the files are in PDF format.

Currently there are no files available for download.