Electric Heat Exchanger

Electric Heat Exchangers

F.A.T.I. make electric heat exchangers for heating all types of gas or liquids. Specifically, heat exchangers can be supplied for:

– Demineralised fresh water
– Thermal oil and liquid hydrocarbons
– Air or nitrogen
– Natural methane gas
– Process gas of any type

The dissipated power can vary up to thousands of kW. The heat exchangers are essentially made up of a heating pipe coil, with a casing that can be produced in IP 40, IP 55, IP 65, IP 66, and IP 67, flameproof Eexd/ATEX execution, installed in a housing tank, designed and made according to the required standard. A wide range of materials is used both for making the heating elements (Mild steel, AISI 304, AISI 316, AISI 321, INCONEL 600, INCOLOY 800 etc.) and for fabricating the tank. Construction according to the principal current standards; PED, ASME, TEMA, ADMERKBLATTER, and STOOMWEZEN.

Technical specifications

Sizes : UPTO 36”

MOC : CS,SS 304, SS310, SS 316,SS 321, Monel others on request

Standard : Compliance to all applicable international standards

MOC : CS,SS 304, SS310, SS 316,SS 321, Inconel 600, Incoloy 800

Immersion Length : upto 4000 mm

Control and monitoring : Integrally Provided with Thermocouple or PT100 RTD, Thermostat Optionally Provided with TT

Degree Protection: IP67

Area Classification : Safe & Hazardous Area

Certification : Ex’db’ Zone1/Zone 2,IIC,T6

Heat Duty : upto 2000kW in single unit

Control Panel : Thyristor &  ON/OFF

Applications

• Crude oil Heaters
• Fuel Gas Conditioning
• TEG Reboilers
• Catalysts Regeneration
• Fuel oil Heating
• Lube oil Preheating
• LNG Heating and Vaporizing
• Air Separation
• KO Drum
• Industrial Gases Heating
• Steam Superheater
• Heat Transfer Fluids
• Water Treatment
• Water Heating
• Storage Tanks Fluid Heating
• Molten salts