Electric Heater Flanged

Electric Heater Flanged

1).Flanged Heaters

F.A.T.I. range of immersion heaters is suitable for heating all process fluids which are non-corrosive
to the materials of construction.
They are primarily intended for use in bulk storage vessels, flow heaters and hot water calorifiers. Ideal for generating steam and heating gases and liquids in pressure vessels and tanks, flanged immersion heaters are hairpin-bent tubular elements welded into a flange and provided with electrical enclosures.
Typical Applications

• Fresh Water
• Sea Water
• Crude Oil
• Process Gas
• Air
• Tank Heating
• Synthetic Oils
• Heating Medium
• KO Drums
• Glycol Re boilers
• Butane/Propane Vaporizer
• Molecular Sleeve Regeneration
• Technical Description

• For heating liquids and gases, the certified enclosure is produced in carbon or Stainless steel.
• Up to 60″ flange acc. ANSI B 16.5;material carbon steel, high alloy steel, nickel alloy, Inconel, etc.
• Degree protection of the enclosure IP40, IP55,IP65, 66, 67
• Standard diameter of heating elements,8.5, 12.5 & 16mm
• Material of elements FE 35.2, ST. ST304, 316 & 321, Alloy 800, 825, Alloy 600, 625, Hastelloy, Copper.

Immersion length up to 4 meters
Power ratings: Up to 4 kW
Flange material:Carbon steel, or stainless steel,INCOLOY and INCONEL.
Sheath material: Copper, steel, stainless steel,INCOLOY or INCONEL
The electric heater bundle can be provided with:

1-Protective and/ or control devices, thermostat, thermocouple or PT100
2-Temperature transmitters
3-Anti condensation heater
4-Cable gland

2). ATEX-Eexd Flanged Heaters

F.A.T.I. range of immersion heaters is suitable for heating all process fluids which are non-corrosive to the materials of construction for installation in Hazardous area Zone 1 & 2.
Certification IECEx-ATEX

“http://www.fati.com/fati_eng/immagini/CERT.png”

Applications Standard
Fresh Water
Sea Water
Crude Oil
Process Gas
Air
Tank Heating
Synthetic Oils
Heating Medium
KO Drums
Glycol Re boilers
Butane/Propane Vaporizer
Molecular Sleeve Regeneration

Technical Description

For heating liquids and gases, the certified enclosure is produced in carbon or Stainless steel.
Up to 36 ” flange acc. ANSI B 16.5;material carbon steel, high alloy steel, nickel alloy, Inconel, etc.
Degree protection of the enclosure IP40, IP55,IP65, 66, 67
Standard diameter of heating elements,8.5, 12.5 & 16mm
Material of elements FE 35.2, ST. ST304, 316 & 321, Alloy 800, 825, Alloy 600, 625, Hastelloy, Copper.

Immersion length up to 4 meters
Power ratings: Up to 4 kW
Flange material:Carbon steel, or stainless steel,INCOLOY and INCONEL.
Sheath material: Copper, steel, stainless steel,INCOLOY or INCONEL
The electric heater bundle can be provided with:
1-Protective and/ or control devices, thermostat, thermocouple or PT100
2-Temperature transmitters
3-Anti condensation heater
4-Cable gland

Electric heater bundle cartridge

FATI -CHT flange Heaters allow heating elements to be changed without decommissioning the tank. Replaceable-style elements can be easily changed by one person with no special tooling required. This is system storage units that need to remain filled for continuous operation and storage

Single replaceable elements

FATI-CHT heaters is designed for many applications ranging from viscous fluids, such as asphalt or Bunker oil, to free-flowing oils, such as hydraulic fluids or lube oil and also be used for water, and water/glycol or acidic mixtures as well as fire water storage and freeze protection.
FATI-CHT heaters are in accordance with API-614 standards
FATI-CHT heaters are certified also for Hazardous area Zone 1 & 2

Certification II2G- Exd IIC T6-T3 Gb As per Standards CENELEC EN 60079-0 / 60079-1